Cycle time of the internal diagnostics
Every SIL approved measuring device has an internal diagnostic routine that detects up to 95% of all possible faults in the device and, if necessary, reports them to the safety system by switching the device to the fault current.
Many devices of older development date still need 30 - 60 min for the internal diagnostics, i.e. in case of a malfunction of the safety function, the error would remain undetected for up to 60 min. In the meantime, the cycle time of the diagnostics could be reduced to 30 seconds to two minutes, so that these devices are even approved for the highest specified operating mode "Continuous Mode".
안전 계장 시스템(SIS) 및 고정밀 요구 사항을 위한 전자기 유량계
고급 프로세스 어플리케이션을 위한 코리올리스 질량 유량계
유틸리티 애플리케이션 및 에너지 관리 시스템용 볼텍스 유량계
위생 요구 사항이 있는 액체를 위한 레이다 레벨 트랜스미터
기본 프로세스 어플리케이션의 유체용 레이다 레벨 트랜스미터
과립부터 암석까지 고체용 레이다 레벨 트랜스미터
분말 및 먼지가 많은 대기를 위한 레이더 레벨 트랜스미터
교반 및 부식성 액체용 레이다 레벨 트랜스미터
내부 장애물이 있는 좁은 탱크의 액체를 위한 레이다 레벨 트랜스미터
고급 액체 어플리케이션을 위한 가이드 레이다(TDR) 레벨 트랜스미터
고온 및 고압의 액체를 위한 가이드 레이다(TDR) 레벨 트랜스미터
과립에서 분말까지 고체용 유도 레이더(TDR) 레벨 트랜스미터